Hi there,
I can't find the option to deactivate the prefixes for chanadmin and chanowner (& and ~).
After doing the upgrade, I had the bad surprise to notice they were activated. So I tried to recompile from the source, the option doesn't exists.
Did I forget something ?
Search found 220 matches
- Tue Dec 28, 2021 5:29 pm
- Forum: Installing and getting connected
- Topic: Unreal 6.0.0 : prefixes for chanadmin and chanowner
- Replies: 7
- Views: 8318
- Tue Dec 28, 2021 4:58 pm
- Forum: Linking servers
- Topic: Unreal 6.0.0 can't link (spkifp mismatch)
- Replies: 4
- Views: 10399
Re: Unreal 6.0.0 can't link (spkifp mismatch)
Ok, found. I don't edit my previous post but prefer to answer to had visibility to this solution: The ./unrealircd spkifp command use conf/tls/server.cert.pem and conf/tls/server.key.pem, it doesn't care of your tls settings in unrealircd.conf. So, if you use let's encrypt, you have to copy and rena...
- Tue Dec 28, 2021 4:06 pm
- Forum: Linking servers
- Topic: Unreal 6.0.0 can't link (spkifp mismatch)
- Replies: 4
- Views: 10399
Unreal 6.0.0 can't link (spkifp mismatch)
Hi there, My servers were working well together when using unreal5.2.2 I upgraded them and now they start but can't link: link.LINK_DENIED_AUTH_FAILED error: Link with server serv1.zeolia.net@X.X.X.X denied: Authentication failed: spkifp mismatch My link block are correct, I did ./unrealircd spkifp ...
- Fri Dec 24, 2021 4:57 pm
- Forum: Installing and getting connected
- Topic: libcurl error
- Replies: 4
- Views: 8171
Re: libcurl error
It was an update test, it looks like the system takes the path I gave when compiling the previous version.
BTW, I didn't remember having setted up this path, I'm pretty sure it cames from the "let us install curl for you" option.
BTW, I didn't remember having setted up this path, I'm pretty sure it cames from the "let us install curl for you" option.
- Thu Dec 23, 2021 4:26 pm
- Forum: Installing and getting connected
- Topic: libcurl error
- Replies: 4
- Views: 8171
Re: libcurl error
Ok, my bad, libcurl4-openssl-dev wasn't installed on the server.
If I remember well, previous versions of unreal had the option to install curl if needed, am I wrong ?
If I remember well, previous versions of unreal had the option to install curl if needed, am I wrong ?
- Thu Dec 23, 2021 3:12 pm
- Forum: UnrealIRCd modules (third party)
- Topic: listrestrict not compatible with unreal6
- Replies: 2
- Views: 7527
listrestrict not compatible with unreal6
On one of my servers (not the same than the libcurl trouble), I tried to upgrade unreal5 to unreal6, I got compilation errors for listrestrict: make[5]: *** [Makefile:46: custommodule] Error 1 make[5]: Leaving directory '/home/zeolia/unrealircd-6.0.0/src/modules/third' ***** Building 3rd party modul...
- Thu Dec 23, 2021 3:07 pm
- Forum: Installing and getting connected
- Topic: libcurl error
- Replies: 4
- Views: 8171
libcurl error
Hi there, My unrealircd is configured to use remote conf, but when I try to upgrade to unreal6, I get: checking curl_easy_init() in -L/home/zeolia/unrealircd/lib -lcurl... no configure: error: in `/home/zeolia/unrealircd-6.0.0': configure: error: You asked for libcURL (remote includes) support, but ...
- Fri Dec 10, 2021 10:44 am
- Forum: Installing and getting connected
- Topic: SSL error with OpenSSl
- Replies: 2
- Views: 7552
Re: SSL error with OpenSSl
I think you don't have server.cert.pem in conf/tls/, so you have to create the certificate.
- Thu Oct 14, 2021 11:10 am
- Forum: UnrealIRCd modules (third party)
- Topic: WALLCHOPS and WALLHOPS
- Replies: 1
- Views: 6808
Re: WALLCHOPS and WALLHOPS
Forget this question: someone told me about /notice @#chan and /notice %#chan which does what I need.
But is it nomal that /notice %#chan sends to @ too ? It's ok for me (only one notice to send) but I think it's strange
But is it nomal that /notice %#chan sends to @ too ? It's ok for me (only one notice to send) but I think it's strange
- Thu Oct 14, 2021 9:15 am
- Forum: UnrealIRCd modules (third party)
- Topic: WALLCHOPS and WALLHOPS
- Replies: 1
- Views: 6808
WALLCHOPS and WALLHOPS
Hi there,
I was sure it exists, but seems that no: a /WALLCHOPS (send notice to all @ of a channel) and /WALLHOPS (send notice to all % of a channel).
Is it possible to develop this module plz ?
I was sure it exists, but seems that no: a /WALLCHOPS (send notice to all @ of a channel) and /WALLHOPS (send notice to all % of a channel).
Is it possible to develop this module plz ?
- Sat Oct 09, 2021 3:33 pm
- Forum: Generic support
- Topic: spamfilter option
- Replies: 9
- Views: 10044
Re: spamfilter option
I think you misunderstood the law. It's not applicable for instant messenging (IRC is instant messenging), it's for platforms where the messages are kept and publicly diffused. Having a spamfilter wich will block illegal messages, or punish user sending illegal messages, is enough, as unrealircd wil...
- Sat Oct 09, 2021 3:24 pm
- Forum: Generic support
- Topic: How have ident who refer to the browser ?
- Replies: 5
- Views: 7764
Re: How have ident who refer to the browser ?
No, the trouble comes from your web interface (kiwiirc, mibbit, ...) and/or the gateway, nothing is related with your ircd or your services.
The ident is given by the user' client
The ident is given by the user' client
- Mon Oct 04, 2021 9:47 pm
- Forum: Generic support
- Topic: A range of IP adresses possible ?
- Replies: 1
- Views: 6313
Re: A range of IP adresses possible ?
Well, 194.187.248.0/22 means 194.187.248.0 to 194.187.251.255, that's not exactly the same than 194.187.248.0-22 which is not a real notation, even if some softwares (as nmap) understand it. But to answer your question, no, you can't use a range, you can only use wildcards. You can try: mask 194.187...
- Tue Sep 21, 2021 1:46 pm
- Forum: Services
- Topic: /List Channels
- Replies: 1
- Views: 8003
Re: /List Channels
The /list command is a par of unrealircd.
You may check if you have not a restrict-command::list setted, and if your client is not filtering empty chans
You may check if you have not a restrict-command::list setted, and if your client is not filtering empty chans
- Thu Sep 16, 2021 10:22 am
- Forum: Installing and getting connected
- Topic: Unrealircd Stop error
- Replies: 2
- Views: 7122
Re: Unrealircd Stop error
Weird, as the line #76 just tests if the pid is really running and you already have passed tests on the existance of this file.
Can you pastebin your /opt/unrealircd/unrealircd file plz ?
Can you pastebin your /opt/unrealircd/unrealircd file plz ?