Bopm-3.1.3 Login Error

The UnrealIRCd team does not officially provide support for any services packages that you may be using or want to use. This forum is provided so the community can help each other with services issues.

Moderator: Supporters

Locked
KuL
Posts: 1
Joined: Mon Nov 02, 2015 11:53 pm

Bopm-3.1.3 Login Error

Post by KuL »

Hello,

at first sorry my english is not the best.

I am an administrator on a server, and I want to try something with a bopm.

This is the code, what I find on the net. I change the action part to privmsg , so that I can see at first how its working. If its stabile i would change it to gline/zline.

Code: Select all

/*

BOPM sample configuration

*/

options {
/*
* Full path and filename for storing the process ID of the running
* BOPM.
*/
pidfile = "/home/username/bopm/bopm.pid ";

/*
* How many seconds to store the IP address of hosts which are
* confirmed (by previous scans) to be secure. New users from these
* IP addresses will not be scanned again until this amount of time
* has passed. IT IS STRONGLY RECOMMENDED THAT YOU DO NOT USE THIS
* DIRECTIVE, but it is provided due to demand.
*
* The main reason for not using this feature is that anyone capable
* of running a proxy can get abusers onto your network - all they
* need do is shut the proxy down, connect themselves, restart the
* proxy, and tell their friends to come flood.
* 
* Keep this directive commented out to disable negative caching.
*/
negcache = 3600;

/*
* Amount of file descriptors to allocate to asynchronous DNS. 64
* should be plenty for almost anyone - previous versions of BOPM only
* did one at a time!
*/
dns_fdlimit = 64;

/*
* Put the full path and filename of a logfile here if you wish to log
* every scan done. Normally BOPM only logs successfully detected
* proxies in the bopm.log, but you may get abuse reports to your ISP
* about portscanning. Being able to show that it was BOPM that did
* the scan in question can be useful. Leave commented for no
* logging.
*/
#	scanlog = "/home/username/ircd/bopm/scan.log";
};


IRC {
/*
* IP to bind to for the IRC connection. You only need to use this if
* you wish BOPM to use a particular interface (virtual host, IP
* alias, ...) when connecting to the IRC server. There is another
* "vhost" setting in the scan {} block below for the actual
* portscans. Note that this directive expects an IP address, not a
* hostname. Please leave this commented out if you do not
* understand what it does, as most people don't need it.
*/
#	vhost = "0.0.0.0";

/*
* Nickname for BOPM to use.
*/
nick = "Charly";

/*
* Text to appear in the "realname" field of BOPM's /whois output.
*/
realname = "System Control";

/*
* If you don't have an identd running, what username to use.
*/
username = "Test";

/*
* Hostname (or IP) of the IRC server which BOPM will monitor
* connections on.
*/
server = "212.XXX.XX.XX";


/*
* Password used to connect to the IRC server (PASS)
*/

#password = "password";


/*
* Port of the above server to connect to. This is what BOPM uses to
* get onto IRC itself, it is nothing to do with what ports/protocols
* are scanned, nor do you need to list every port your ircd listens
* on.
*/
port = 6667;

/*
* Command to execute to identify to NickServ (if your network uses
* it). This is the raw IRC command text, and the below example
* corresponds to "/msg nickserv identify password" in a client. If
* you don't understand, just edit "password" in the line below to be
* your BOPM's nick password. Leave commented out if you don't need
* to identify to NickServ.
*/
	nickserv = "privmsg nickserv :identify XXXXXX";

/*
* The username and password needed for BOPM to oper up.
*/
oper = "OPERNICK OPERPASS";

/*
* Mode string that BOPM needs to set on itself as soon as it opers
* up. This needs to include the mode for seeing connection notices,
* otherwise BOPM won't scan anyone (that's usually umode +c). It's
* often also a good idea to remove any helper modes so that users
* don't try to talk to the BOPM.
*
* REMEMBER THAT IRCU AND LATER VERSIONS OF UNREAL DO NOT USE A SIMPLE
* +c !!
*/
mode = "+scHD-h";

/* Example for Bahamut; +F gives BOPM relaxed flood limits */
#	mode = "+Fc-h";

/*
* If this is set then BOPM will use it as an /away message as soon as
* it connects.
*/
away = "BOPM System";

/*
* Info about channels you wish BOPM to join in order to accept
* commands. BOPM will also print messages in these channels every
* time it detects a proxy. Only IRC operators can command BOPM to do
* anything, but some of the things BOPM reports to these channels
* could be soncidered sensitive, so it's best not to put BOPM into
* public channels.
*/
channel {
/*
* Channel name. Local ("&") channels are supported if your ircd
* supports them.
*/
name = "#sistem";

/*
* If BOPM will need to use a key to enter this channel, this is
* where you specify it.
*/
#	 key = "somekey";

/*
* If you use ChanServ then maybe you want to set the channel
* invite-only and have each BOPM do "/msg ChanServ invite" to get
* itself in. Leave commented if you don't, or if this makes no
* sense to you.
*/
#	 invite = "privmsg chanserv :invite #sistem";
};

/*
* You can define a bunch of channels if you want:
*
* channel { name = "#sistem"; }; channel { name="#sistem"; }
*/

/*
* connregex is a POSIX regular expression used to parse connection
* (+c) notices from the ircd. The complexity of the expression should
* be kept to a minimum.
* 
* Items in order MUST be: nick user host IP
*
* BOPM will not work with ircds which do not send an IP in the
* connection notice.
*
* This is fairly complicated stuff, and the consequences of getting
* it wrong are the BOPM does not scan anyone. Unless you know
* absolutely what you are doing, please just uncomment the example
* below that best matches the type of ircd you use.
*
* !!! NOTE !!! If a connregex for your ircd does not appear here and the
* hybrid connregex does not appear to work, check the BOPM FAQ at 
* http://blitzed.org/bopm/faq.phtml before contacting our lists for help.
*
*/

/* Hybrid / Bahamut / Unreal (in HCN mode) */
connregex = "\\*\\*\\* Notice -- Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";
/*
* Ultimate ircd - note the control-B characters around Connect/Exit,
* that is because that text appears in bold in the actual connect
* notice. Be very careful when editing this, do it as you would put
* bold characters into IRC MOTDs.
*/
#	connregex = "\\*\\*\\* Connect/Exit -- from [^:]+: Client connecting on port [0-9]+: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";

/*
* SorIRCd 1.3.4+ / StarIRCd 5.26+.
*/
#	connregex = "\\*\\*\\* Notice -- Client connecting on port [0-9]+: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";


/*
* "kline" controls the command used when an open proxy is confirmed.
* We suggest applying a temporary (no more than a few hours) KLINE on the host.
*
* <WARNING>
* Please note that if you are matching against our DNSBL
* opm.blitzed.org (see further below), then you will need some way to
* let users know how they can be removed from this DNSBL. That is
* the purpose of the blitzed.org URL in the example message, so
* please do not remove it unless you also disable DNSBL lookups (or
* if you use a different DNSBL).
*
* Also note that you cannot include ':' characters actually inside
* the KLINE message (e.g. for a http:// address).
*
* Users rewriting this message into something that isn't even a valid
* IRC command is the single most common cause of support requests and
* therefore WE WILL NOT SUPPORT YOU UNLESS YOU USE ONE OF THE EXAMPLE
* KLINE COMMANDS BELOW.
* </WARNING>
*
* That said, should you wish to customise this text, several
* printf-like placeholders are available:
*
* %n User's nick
* %u User's username
* %h User's irc hostname
* %i User's IP address
*
*/
kline = "privmsg #sistemGLINE *@%i 10d :You are using Proxy!";

/*
* If you would prefer very plain pages then try this one. There's
* also an index3.phtml which is even more plain, useful for parsing
* via your own pages if you are trying to make your own interface to
* it. If you know XML though, talk to [email protected] about
* use of the XML interface to it.
*/
# kline = "privmsg #sistem KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/opm/index2.phtml?ip=%i for more information.";

/* A GLINE example for IRCu: */
# kline = "privmsg #sistem GLINE +*@%i 1800 :Open proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

/*
* Text to send on connection, these can be stacked and will be sent in this order
* 
* !!! UNREAL USERS PLEASE NOTE !!!
* Unreal users will need PROTOCTL HCN to force hybrid connect
* notices.
*
* Yes Unreal users! That means you! That means you need the line
* below! See that thing at the start of the line? That's what we
* call a comment! Remove it to UNcomment the line.
*/
perform = "PROTOCTL HCN";

};


/*
* OPM Block defines blacklists and information required to report new proxies
* to a dns blacklist. DNS-based blacklists store IP addresses in a DNS zone
* file. In the case of opm.blitzed.org, we store the IP addresses of known
* insecure proxy servers. By checking against this blacklist, BOPMs are able
* to ban known proxies without having to scan them all.
*
* If you still don't underdstand what a DNSBL is, have a look at
* http://www.blitzed.org/opm.
*/

OPM {

blacklist {
    name = "dnsbl.proxybl.org";
    type = "A record reply";
    reply {
        2 = "Open proxy";
    };
    ban_unknown = no;
    kline = "privmsg #sistem GLINE *@%h 24d :You are using Proxy!"; 
};
        blacklist {
           name = "rbl.efnet.org";
           type = "A record reply";
           reply {
              1 = "Open proxy";
              2 = "Trojan spreader";
              3 = "Trojan infected client";
              4 = "TOR exit server";
              5 = "Drones / Flooding";
           };
           ban_unknown = no;
           kline = "privmsg #sistem GLINE *@%h 24d :You are using Proxy!";        };

#        /* ircbl.ahbl.org - see http://ahbl.org/docs/ircbl
#         * http://oldwww.temp.ahbl.org/docs/ircbl.php */
        blacklist {
           name = "ircbl.ahbl.org";
           type = "A record reply";
           ban_unknown = no;
           reply {
              2 = "Open proxy";
           };
           kline = "privmsg #sistem GLINE *@%h 24d :You are using Proxy!";
        };

         /* tor.dnsbl.sectoor.de - http://www.sectoor.de/tor.php */
        blacklist {
           name = "tor.dnsbl.sectoor.de";
           type = "A record reply";
           reply {
              1 = "Tor exit server";
           };
           ban_unknown = no;
           kline = "privmsg #sistem GLINE *@%h 24d :You are using Proxy!";
        };
blacklist {
    name = "dnsbl.dronebl.org";
    type = "A record reply";
    reply {
        2 = "Sample";
        5 = "Bottler";
        7 = "DDOS Drone";
        8 = "SOCKS Proxy";
        9 = "HTTP Proxy";
        10 = "ProxyChain";
        12 = "Trolls (perm)";
        13 = "Brute force attackers";
        14 = "Open Wingate Proxy";
        15 = "Compromised router / gateway";
    };
        ban_unknown = no;
        kline = "privmsg #sistem GLINE *@%i 24d :You are using Proxy! ";
};
        blacklist {
           name = "tor.dnsbl.sectoor.de";
           type = "A record reply";
           reply {
              1 = "Tor exit server";
           };
           ban_unknown = no;
           kline = "privmsg #sistem GLINE *@%i 24d :You are using Proxy!";
        };
        blacklist {
                name = "tor.dan.me.uk";
                type = "A record reply";
                reply {
                        100 = "Tor exit server";
                };
                ban_unknown = no;
                kline = "privmsg #sistem GLINE *@%i 24d :You are using Proxy!";
        };
        blacklist {
                name = "tor.ahbl.org";
                type = "A record reply";
                reply {
                        2 = "Tor exit server";
                };
                ban_unknown = no;
                kline = "privmsg #sistem GLINE *@%i 24d :You are using Proxy! ";
        };
/*
* You can specify multiple DNSBLs. Some people see "opm.blitzed.org"
* and mindlessly change the "blitzed.org" part to be their own
* domain. Please don't do this unless you really do run your own
* DNSBL, all you will accomplish is filling your channels with DNS
* error messages. opm.blitzed.org should be adequate for most
* people.
*/

/* example: NJABL - please read http://www.njabl.org/use.html before
* uncommenting */
#	 blacklist {
#	 name = "dnsbl.njabl.org";
#	 type = "A record reply";
#	 reply {
#	 9 = "Open proxy";
#	 };
#	 ban_unknown = no;
#	 kline = "privmsg #sistem KLINE *@%h :Open proxy found on your host, please visit www.njabl.org/cgi-bin/lookup.cgi?query=%i";
#	};

/*
* You can report the insecure proxies you find to our DNSBL also!
* The remaining directives in this section are only needed if you
* intend to do this. Reports are sent by email, one email per IP
* address. The format does support multiple addresses in one email,
* but we don't know of any servers that are detecting enough insecure
* proxies for this to be really necessary.
*/

/*
* Email address to send reports FROM. If you intend to send reports,
* please pick an email address that we can actually send mail to
* should we ever need to contact you.
*/
#	dnsbl_from = "[email protected]";

/*
* Email address to send reports TO.
*/
#	dnsbl_to = "[email protected]";

/*
* Full path to your sendmail binary. Even if your system does not
* use sendmail, it probably does have a binary called "sendmail"
* present in /usr/sbin or /usr/lib. If you don't set this, no
* proxies will be reported.
*/
#	sendmail = "/usr/sbin/sendmail";
};


/*
* The short explanation:
*
* This is where you define what ports/protocols to check for. You can have
* multiple scanner blocks and then choose which users will get scanned by
* which scanners further down.
*
* The long explanation:
*
* Scanner defines a virtual scanner. For each user being scanned, a scanner
* will use a file descriptor (and subsequent connection) for each protocol.
* Once connecting it will negotiate the proxy to connect to
* target_ip:target_port (target_ip MUST be an IP).
*
* Once connected, any data passed through the proxy will be checked to see if
* target_string is contained within that data. If it is the proxy is
* considered open. If the connection is closed at any point before
* target_string is matched, or if at least max_read bytes are read from the
* connection, the negotiation is considered failed.
*/

scanner { 
name="default"; 
protocol = HTTP:80; 
protocol = HTTP:8080; 
protocol = HTTP:3128; 
protocol = HTTP:6588; 
protocol = HTTP:81; 
protocol = HTTP:8000; 
protocol = HTTP:8001; 
protocol = HTTP:8081; 
protocol = HTTPPOST:80; 
protocol = HTTPPOST:81; 
protocol = HTTPPOST:6588; 
protocol = HTTPPOST:4480; 
protocol = HTTPPOST:8000; 
protocol = HTTPPOST:8001; 
protocol = HTTPPOST:8080; 
protocol = HTTPPOST:8081; 
protocol = SOCKS4:1080; 
protocol = SOCKS4:14281; 
protocol = SOCKS4:1029; 
protocol = SOCKS4:1212; 
protocol = SOCKS4:4914; 
protocol = SOCKS4:6826; 
protocol = SOCKS4:7198; 
protocol = SOCKS4:7366; 
protocol = SOCKS4:9036; 
protocol = SOCKS4:18572; 
protocol = SOCKS4:8481; 
protocol = SOCKS4:2782; 
protocol = SOCKS4:6598; 
protocol = SOCKS4:8725; 
protocol = SOCKS4:18292; 
protocol = SOCKS4:37046; 
protocol = SOCKS4:17979; 
protocol = SOCKS4:3380; 
protocol = SOCKS4:19232; 
protocol = SOCKS4:53431; 
protocol = SOCKS4:1979; 
protocol = SOCKS4:3380; 
protocol = SOCKS4:45479; 
protocol = SOCKS4:43871; 
protocol = SOCKS4:58632; 
protocol = SOCKS4:48860; 
protocol = SOCKS4:26841; 
protocol = SOCKS4:39470; 
protocol = SOCKS4:7545; 
protocol = SOCKS4:12781; 
protocol = SOCKS4:29913; 
protocol = SOCKS4:54906; 
protocol = SOCKS4:6134; 
protocol = SOCKS4:7040; 
protocol = SOCKS4:2373; 
protocol = SOCKS4:4471; 
protocol = SOCKS4:19310; 
protocol = SOCKS4:2425; 
protocol = SOCKS4:12654; 
protocol = SOCKS4:53605; 
protocol = SOCKS4:24781; 
protocol = SOCKS4:4777; 
protocol = SOCKS4:50115; 
protocol = SOCKS4:39540; 
protocol = SOCKS4:65490; 
protocol = SOCKS4:35803; 
protocol = SOCKS4:53838; 
protocol = SOCKS4:43479; 
protocol = SOCKS4:6064; 
protocol = SOCKS4:15113; 
protocol = SOCKS4:59467; 
protocol = SOCKS4:8923; 
protocol = SOCKS4:48561; 
protocol = SOCKS4:55822; 
protocol = SOCKS4:14795; 
protocol = SOCKS4:10197; 
protocol = SOCKS4:36135; 
protocol = SOCKS4:41417; 
protocol = SOCKS4:12952; 
protocol = SOCKS4:36508; 
protocol = SOCKS4:4960; 
protocol = SOCKS4:42468; 
protocol = SOCKS4:48649; 
protocol = SOCKS5:14795; 
protocol = SOCKS5:42468; 
protocol = SOCKS5:4960; 
protocol = SOCKS5:22808; 
protocol = SOCKS5:12952; 
protocol = SOCKS5:41417; 
protocol = SOCKS5:48649; 
protocol = SOCKS5:36135; 
protocol = SOCKS5:3320; 
protocol = SOCKS5:8500; 
protocol = SOCKS5:10197; 
protocol = SOCKS5:55822; 
protocol = SOCKS5:43479; 
protocol = SOCKS5:53838; 
protocol = SOCKS5:24781; 
protocol = SOCKS5:12654; 
protocol = SOCKS5:4471; 
protocol = SOCKS5:2373; 
protocol = SOCKS5:7040; 
protocol = SOCKS5:54906; 
protocol = SOCKS5:29913; 
protocol = SOCKS5:1813; 
protocol = SOCKS5:1080; 
protocol = SOCKS5:14281; 
protocol = SOCKS5:1029; 
protocol = SOCKS5:1212; 
protocol = SOCKS5:8481; 
protocol = SOCKS5:18572; 
protocol = SOCKS5:4438; 
protocol = SOCKS5:5104; 
protocol = SOCKS5:5113; 
protocol = SOCKS5:5262; 
protocol = SOCKS5:5634; 
protocol = SOCKS5:6552; 
protocol = SOCKS5:6561; 
protocol = SOCKS5:7464; 
protocol = SOCKS5:7810; 
protocol = SOCKS5:8130; 
protocol = SOCKS5:8148; 
protocol = SOCKS5:8520; 
protocol = SOCKS5:8814; 
protocol = SOCKS5:9100; 
protocol = SOCKS5:9186; 
protocol = SOCKS5:9447; 
protocol = SOCKS5:9578; 
protocol = ROUTER:23; 
protocol = WINGATE:23; 
# vhost = "127.0.0.1"; 


fd = 512;

max_read = 4096;

timeout = 30;

target_ip = "31.210.155.203";

target_port = 3542;


/* Usually first line sent to client on connection to ircd. 
* If your ircd supports a more specific line (see below),
* using it will reduce false positives.
*/
#target_string = "*** Looking up your hostname...";

/* Some ircds give a source for the NOTICE AUTH (bahamut for example).
* It is recommended you use the following instead of the generic
* "*** Looking up your hostname..." if your ircd supports it. 
* This will reduce the chances of false positives.
*/
	target_string = ":Sitemiz  NOTICE AUTH :*** Looking up your hostname...";

/* If you try to connect too fast, you'll be throttled by your own
* ircd. Here's what a hybrid throttle message looks like:
*/
target_string = "ERROR :Trying to reconnect too fast.";

/* And the same for bahamut (comment this out if you're not using bahamut): */
target_string = "ERROR :Your host is trying to (re)connect too fast -- throttled.";
};

scanner { 
name = "extended"; 
protocol = HTTP:81; 
protocol = HTTP:8000; 
protocol = HTTP:8001; 
protocol = HTTP:8081; 
protocol = HTTPPOST:81; 
protocol = HTTPPOST:6588; 
# protocol = HTTPPOST:4480; 
protocol = HTTPPOST:8000; 
protocol = HTTPPOST:8001; 
protocol = HTTPPOST:8080; 
protocol = HTTPPOST:8081; 
/*
* IRCnet have seen many socks5 on these ports, more than on the
* standard ports even.
*/
protocol = SOCKS4:4914;
protocol = SOCKS4:6826;
protocol = SOCKS4:7198;
protocol = SOCKS4:7366;
protocol = SOCKS4:9036;
protocol = SOCKS5:4438;
protocol = SOCKS5:5104;
protocol = SOCKS5:5113;
protocol = SOCKS5:5262;
protocol = SOCKS5:5634;
protocol = SOCKS5:6552;
protocol = SOCKS5:6561;
protocol = SOCKS5:7464;
protocol = SOCKS5:7810;
protocol = SOCKS5:8130;
protocol = SOCKS5:8148;
protocol = SOCKS5:8520;
protocol = SOCKS5:8814;
protocol = SOCKS5:9100;
protocol = SOCKS5:9186;
protocol = SOCKS5:9447;
protocol = SOCKS5:9578;
protocol = WINGATE:1181;
protocol = SOCKS5:1180;
protocol = HTTPPOST:3128;
protocol = HTTP:3128;
protocol = HTTP:80;
protocol = HTTPPOST:555;
protocol = HTTP:1182;
protocol = HTTPPOST:6588;
protocol = SOCKS5:1813;
protocol = HTTP:4480;
protocol = HTTP:8000;
protocol = HTTP:9778;
protocol = HTTP:25318;
protocol = SOCKS5:25791;
protocol = HTTPPOST:8000;
protocol = SOCKS5:5104;
protocol = HTTP:81;
protocol = HTTP:2282;
protocol = SOCKS5:5262;
protocol = HTTPPOST:5121;
protocol = SOCKS5:8814;
protocol = SOCKS5:6552;
protocol = SOCKS5:4438;
protocol = HTTPPOST:81;
protocol = SOCKS5:8148;
protocol = SOCKS5:4044;
protocol = HTTPPOST:4480;
protocol = SOCKS5:9186;
protocol = SOCKS5:8130;
protocol = HTTPPOST:8548;
protocol = SOCKS5:5634;



fd = 400;

/* If required you can add settings such as target_ip here
* they will override the defaults set in the first scanner
* for this and subsequent scanners defined in the config file
* This affects the following options:
* fd, vhost, target_ip, target_port, target_string, timeout and
* max_read.
*/
};



/*
* User blocks define what scanners will be used to scan which hostmasks. When
* a user connects they will be scanned on every scanner {} (above) that
* matches their host.
*/

user {
/*
* Users matching this host mask will be scanned with all the
* protocols in the scanner named.
*/
mask = "*!*@*";
scanner = "default";
};

user {
/* Connections without ident will match on a vast number of connections
* very few proxies run ident though */
#	mask = "*!~*@*";
   mask = "*!squid@*";
   mask = "*!nobody@*";
   mask = "*!www-data@*";
   mask = "*!cache@*";
   mask = "*!CacheFlowS@*";
   mask = "*!*@*www*";
   mask = "*!*@*proxy*";
   mask = "*!*@*cache*";
   mask = "*!*@*.optonline.net";
   mask = "*!*@24.191.0.*";
   mask = "*!*@*.comcast.net";
   mask = "*!*@*.attbi.com";
   mask = "*!*@*.gbt2003.com";
   mask = "*!*@*.interbusiness.it";    
   mask = "*!*@*.il24.net";
   mask = "*!*@*.bbtec.net";
   mask = "*!*@*.speedy.net.pe";
   mask = "*!*@*.telesp.net.br";
   mask = "*!*@*.enamm.edu.pe";
   mask = "*!*@*.lv.lv.cox.net";
   mask = "*!*@*.ipt.aol.com";

scanner = "extended";
};


/*
* Exempt hosts matching certain strings from any form of scanning or dnsbl.
* BOPM will check each string against both the hostname and the IP address of
* the user.
*
* There are very few valid reasons to actually use "exempt". BOPM should
* never get false positives, and we would like to know very much if it does.
* One possible scenario is that the machine BOPM runs from is specifically
* authorized to use certain hosts as proxies, and users from those hosts use
* your network. In this case, without exempt, BOPM will scan these hosts,
* find itself able to use them as proxies, and ban them.
*/
exempt {
mask = "*!*@72.20.35.242";
};
NOW: My problem is the login.

Because we dont have the system with /oper nick pass

We have a own server for the admins

and we are loging like that: /server admin.xxxxxx.xxx:port nick:pass

How must i change the conf that i join the server.

And my second question is, is ther any way that if the bopm bot is sajoined by someone that he automaticly part from this channel?

I want that he stay only in one channel, if he join another channel, he should part.
Syzop
UnrealIRCd head coder
Posts: 2112
Joined: Sat Mar 06, 2004 8:57 pm
Location: .nl
Contact:

Re: Bopm-3.1.3 Login Error

Post by Syzop »

The BOPM bot needs to see the "Client connecting" server notices, which requires snomask +s +c / +s +cF which is an ircop-only snomask. And normally you use it to KLINE, which also requires IRCOp privileges.

As for your question on passing the nick:pass, see the config:

Code: Select all

/*
* Password used to connect to the IRC server (PASS)
*/

password = "nick:pass";
And naturally the port is port = xxxxx in your config

As for your auto-part question, I don't think there's such an option. It's a rather dumb bot that does what it needs to do.
Syzop
UnrealIRCd head coder
Posts: 2112
Joined: Sat Mar 06, 2004 8:57 pm
Location: .nl
Contact:

Re: Bopm-3.1.3 Login Error

Post by Syzop »

Also, in UnrealIRCd 4 we have native support for DNSBL via the https://www.unrealircd.org/docs/Blacklist_block
Just mentioning :)
Locked