Help Installing IRCD
Help Installing IRCD
I know I sound like a n00b but I have no freakin idea where to start. I have a dedicated server and I need to install it remotely, I've searched and read the FAQ but I really don't know where to begin.
My remote server has Redhat installed and I can SSH into it. Thanks in advance for anyone who can guide me into the general direction!
My remote server has Redhat installed and I can SSH into it. Thanks in advance for anyone who can guide me into the general direction!
Hi im john "recently new" to ircd programing,
I'm really proud i have got so far yet not complete unreal3.2.3 is remotely hosted
I have tried to work this out my self as i like a chalenge
I'm am disabled (luekeamia) and my sights not to good hock: "must not get stressed hmm"
alass i need a little help from a good willed person who could help me sort a couple of problems left as my eye's are not at
John says:
my best at this time
I have tried not to ask for help
I have done setup "make" finally through most of config
[error] ERROR: No cloaking module loaded.
tail: /usr/home/*******/Unreal3.2/ircd.log: No such file or directory
*********:~/Unreal3.2$ ./load cloak.so
-bash: ./load: No such file or directory
if its poss someone could help me out as i think ive earned a little help after the
John says:
big challenge ive had its been great
regards john
I'm really proud i have got so far yet not complete unreal3.2.3 is remotely hosted
I have tried to work this out my self as i like a chalenge
I'm am disabled (luekeamia) and my sights not to good hock: "must not get stressed hmm"
alass i need a little help from a good willed person who could help me sort a couple of problems left as my eye's are not at
John says:
my best at this time
I have tried not to ask for help
I have done setup "make" finally through most of config
[error] ERROR: No cloaking module loaded.
tail: /usr/home/*******/Unreal3.2/ircd.log: No such file or directory
*********:~/Unreal3.2$ ./load cloak.so
-bash: ./load: No such file or directory
if its poss someone could help me out as i think ive earned a little help after the
John says:
big challenge ive had its been great
regards john
Better ask your administrator first. Its not unlikely that he doesn't allow the use of executables, resulting in you being unable to start anything.skafia wrote:Okay, I extracted the files to my root directory and I connect via SSH to the server and when I type in "./Config" to configure the server it says Permission Denied.
With kind regards, Peter
NekoNet IRC
www.neko-net.org / [url=irc://irc.neko-net.org:6667]irc.neko-net.org[/url]
NekoNet IRC
www.neko-net.org / [url=irc://irc.neko-net.org:6667]irc.neko-net.org[/url]
-
- Head of Support
- Posts: 2085
- Joined: Tue Jun 15, 2004 8:50 pm
- Location: Chino Hills, CA, US
- Contact:
If it said something likeThen that means it did not extract correctly. To properly extract it, you must extract the files on the server itself. If you dont, the permissions get changed, and you cant ./Config if it does not have the excecute permission.
Code: Select all
-bash: ./Config: Permission denied
suffolk wrote:Hi im john "recently new" to ircd programing,
I'm really proud i have got so far yet not complete unreal3.2.3 is remotely hosted
I have tried to work this out my self as i like a chalenge
I'm am disabled (luekeamia) and my sights not to good hock: "must not get stressed hmm"
alass i need a little help from a good willed person who could help me sort a couple of problems left as my eye's are not at
John says:
my best at this time
I have tried not to ask for help
I have done setup "make" finally through most of config
[error] ERROR: No cloaking module loaded.
tail: /usr/home/*******/Unreal3.2/ircd.log: No such file or directory
*********:~/Unreal3.2$ ./load cloak.so
-bash: ./load: No such file or directory
if its poss someone could help me out as i think ive earned a little help after the
John says:
big challenge ive had its been great
regards john
Check the path to the cloak.so file . very likely a typo hence it cant find the file .
Yawn. So there's yet another "if the user clicks the button, they're infected" exploit. Why is this news? We already know users are idiots.
Any news on whether a firewall is active skafia?
-ChatSpike IRC Network [http://www.chatspike.net]
-Denora Stats [http://denora.nomadirc.net]
-Omerta [http://www.barafranca.com]
-Denora Stats [http://denora.nomadirc.net]
-Omerta [http://www.barafranca.com]
Well i've gone over it several times it must be staring me in the eyes. I checked it is in correct place src/modules/cloak.so
---------------------
* Loading IRCd configuration ..
[error] ERROR: No cloaking module loaded. (hint: you probably want to load cloak.so)
-------------------
/* FOR *NIX, uncomment the following 2lines: */
//loadmodule "src/modules/commands.so";
//loadmodule "src/modules/cloak.so";
cloak-keys {
"aoAr1HnR6gl3sJ7hVz4Zb7x4YwpW";
"qF5D3ormaH6mnEvbaH226lfEhjf";
"hfA6HwFh53HedOwQg9Ufs";
};
---------------------
* Loading IRCd configuration ..
[error] ERROR: No cloaking module loaded. (hint: you probably want to load cloak.so)
-------------------
/* FOR *NIX, uncomment the following 2lines: */
//loadmodule "src/modules/commands.so";
//loadmodule "src/modules/cloak.so";
cloak-keys {
"aoAr1HnR6gl3sJ7hVz4Zb7x4YwpW";
"qF5D3ormaH6mnEvbaH226lfEhjf";
"hfA6HwFh53HedOwQg9Ufs";
};
Alright, woohoo! I got a reply back from the administrators and they said there was an active firewall and port 6667 wasn't open. They opened it and the server works now!
Now, onto another question, I'm trying to add an ops and I have the following:
But when I connect and give myself ops, it won't work
Now, onto another question, I'm trying to add an ops and I have the following:
Code: Select all
oper skafia {
class clients;
from {
userhost "[email protected]";
};
password "xxxxxx";
flags
{
netadmin;
can_zline;
can_gzline;
can_gkline;
global;
};
};
-
- Head of Support
- Posts: 2085
- Joined: Tue Jun 15, 2004 8:50 pm
- Location: Chino Hills, CA, US
- Contact:
You can't have your nick as part of the host.
Start with a very broad host
Then something a little more restrictive
Then something a little more restrictive than that
Hints:
Start with a very broad host
Code: Select all
*@*
Code: Select all
*@*.snbrca.adelphia.net
Code: Select all
god@*.snbrca.adelphia.net
- You don't want to use your full IP with your host. Unless you pay extra for a static IP, your IP isn't static.
- Put a * in front of your ident if you have identd enabled. This will still allow you to oper if an identd request didn't make it through for some reason.
Ah . .....suffolk wrote: Well i've gone over it several times it must be staring me in the eyes. I checked it is in correct place src/modules/cloak.so
---------------------
* Loading IRCd configuration ..
[error] ERROR: No cloaking module loaded. (hint: you probably want to load cloak.so)
-------------------
/* FOR *NIX, uncomment the following 2lines: */
//loadmodule "src/modules/commands.so";
//loadmodule "src/modules/cloak.so";
cloak-keys {
"aoAr1HnR6gl3sJ7hVz4Zb7x4YwpW";
"qF5D3ormaH6mnEvbaH226lfEhjf";
"hfA6HwFh53HedOwQg9Ufs";
};
loadmodule "src/modules/commands.so";
loadmodule "src/modules/cloak.so";
try that instead
and I'd change your cloak keys as well as you posted them up
Yawn. So there's yet another "if the user clicks the button, they're infected" exploit. Why is this news? We already know users are idiots.