Problem with starting unrealircd

These are old archives. They are kept for historic purposes only.
Post Reply
Juje007
Posts: 5
Joined: Sat Nov 25, 2006 12:00 am

Problem with starting unrealircd

Post by Juje007 » Sat Nov 25, 2006 12:08 am

Hi,

Wen i start unrealircd on my pc ( windows 2000 ) he opening the irc server but not a window with all buttons like shutdown etc. so i cant stop or restart. I have looked in service log he says:

Code: Select all

* Loading IRCd configuration ..
* Configuration loaded without any problems ..
So my question is how to fix this.

Grunt
Posts: 159
Joined: Mon Jan 09, 2006 7:31 pm
Contact:

Post by Grunt » Sat Nov 25, 2006 8:30 am

I'm guessing you installed UnrealIRCd as a service. Go to the Unreal directory with a command prompt, and type "unreal stop", then "wircd.exe", and that window should appear.
Computers are machines that cause trouble you wouldn't normally have if you wouldn't have a computer.

Juje007
Posts: 5
Joined: Sat Nov 25, 2006 12:00 am

Post by Juje007 » Sat Nov 25, 2006 2:24 pm

Grunt wrote:I'm guessing you installed UnrealIRCd as a service. Go to the Unreal directory with a command prompt, and type "unreal stop", then "wircd.exe", and that window should appear.
Thank you very much man :D :D.
Thats helps alot.

But now is the question how do i make myself admin what need i to type in my config file?

Jobe
Official supporter
Posts: 1180
Joined: Wed May 03, 2006 7:09 pm
Location: United Kingdom

Post by Jobe » Sat Nov 25, 2006 4:49 pm

I suggest you start by reading the example.conf file completly AND by having a look at http://www.vulnscan.org/UnrealIRCd/unre ... #operblock

Juje007
Posts: 5
Joined: Sat Nov 25, 2006 12:00 am

Post by Juje007 » Sun Nov 26, 2006 2:16 pm

Jobe1986 wrote:I suggest you start by reading the example.conf file completly AND by having a look at http://www.vulnscan.org/UnrealIRCd/unre ... #operblock
I know that but i dont understand it and wen i typ /oper myname password he say "No O-lines for your host" but i have o line's in my config file so i dont understand it and what need i type here

Code: Select all

oper bobsmith {
	class clients;
	from {
		userhost bob@smithco.com;
		userhost boblaptop@somedialupisp.com;
	};
	password "f00";
	flags {
		netadmin;
		can_gkline;
		can_gzline;
		can_zline;
		can_restart;
		can_die;
		global;
	};
	swhois "Voorbeeld van een whois mask";
	snomask frebWqFv;
};
On the section userhost? my ip from mIRC or what else.

Jobe
Official supporter
Posts: 1180
Joined: Wed May 03, 2006 7:09 pm
Location: United Kingdom

Post by Jobe » Sun Nov 26, 2006 3:15 pm

For the userhost value i would reccomend somthing like *@yourip Where yourip is the IP your IRCd sees you as connectint from. So for example to find that out you can connect to your IRCd and type /userip YOURNICK and that should tell you your IP.

Post Reply