Cant Start

These are old archives. They are kept for historic purposes only.
Post Reply
hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Cant Start

Post by hekill » Tue Jan 20, 2009 10:07 pm

i went to go run the ircd thing, but it wont start. it says
the box wrote:C:\unreal3.2\wircd.exe

the application has failed to start because its side-by-side configuration is incorrect. Please
see the application event log for more detail.
what does that mean? :(

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Tue Jan 20, 2009 11:06 pm

that quit coming up after i tried installing again, but now i get:

* Loading IRCd configuration ..
[warning] unrealircd.conf:255: listen with SSL flag enabled on a non SSL compile
[warning] unrealircd.conf:322: link hub.mynet.com with SSL option enabled on a non-SSL compile
[error] unrealircd.conf:538: tld::motd: ircd.motd.fr: No such file or directory
[error] unrealircd.conf:539: tld::rules: ircd.rules.fr: No such file or directory
[error] unrealircd.conf:736: set::kline-address must be an e-mail or an URL
[error] 4 errors encountered
[error] IRCd configuration failed to pass testing

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Wed Jan 21, 2009 1:37 am

now i have this message...


* Loading IRCd configuration ..
[warning] unrealircd.conf:255: listen with SSL flag enabled on a non SSL compile
[error] ERROR: No cloaking module loaded. (hint: you probably want to load modules\cloak.dll)
[error] If you are upgrading from 3.2 (or any older version), be sure to read the release notes or www.vulnscan.org/tmp/newcloak.txt regarding the cloaking change!
[error] IRCd configuration failed to pass testing

[dx]
Posts: 107
Joined: Sat Jun 16, 2007 1:03 am

Re: Cant Start

Post by [dx] » Wed Jan 21, 2009 6:32 am

Add line

loadmodule "modules/cloak.dll";

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Wed Jan 21, 2009 8:41 pm

i did, but it still wont work :(

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Thu Jan 22, 2009 2:20 am

its supposed to say this, right?

cloak-keys {
loadmodule "modules/cloak.dll";
"AHos2HOHS6ds2gsQQHGAkish";
};

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Cant Start

Post by Casper » Thu Jan 22, 2009 11:12 am

No, you've got to get the lines apart. It's the best to put the 'loadmodule' on top of the unrealircd.conf and leave the clockkeys (i.e. more than one) where they are.
Ex Network-Administrator

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Thu Jan 22, 2009 9:00 pm

so where do i put the
loadmodule "modules/cloak.dll";
:?: :?: :?:

hekill
Posts: 7
Joined: Tue Jan 20, 2009 9:57 pm
Location: USA, SC
Contact:

Re: Cant Start

Post by hekill » Fri Jan 23, 2009 2:38 am

i think i figured it out, but now i get this!

* Loading IRCd configuration ..
[error] Unable to create file 'tmp/53F635FE.commands.dll': Permission denied
* unrealircd.conf:40: loadmodule modules/commands.dll: failed to load: Failed to copy module file.
[error] IRCd configuration failed to load

Post Reply