Please Help Me About Bopm

Talk about pretty much anything here, but DO NOT USE FOR SUPPORT.

Moderator: Supporters

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Please Help Me About Bopm

Post by MaRkODrAcUlA » Fri Feb 20, 2009 5:21 pm

First Hello Guys
I Want Help About Bopm

:(

I cant Connect To Server
This Is My Conf.

Code: Select all

/*

BOPM sample configuration

*/

options {
	/*
	 * Full path and filename for storing the process ID of the running
	 * BOPM.
	 */
	pidfile = "/cygdrive/c/BOPM/bopm.pid";

	/*
	 * How many seconds to store the IP address of hosts which are
	 * confirmed (by previous scans) to be secure.  New users from these
	 * IP addresses will not be scanned again until this amount of time
	 * has passed. IT IS STRONGLY RECOMMENDED THAT YOU DO NOT USE THIS
	 * DIRECTIVE, but it is provided due to demand.
	 *
	 * The main reason for not using this feature is that anyone capable
	 * of running a proxy can get abusers onto your network - all they
	 * need do is shut the proxy down, connect themselves, restart the
	 * proxy, and tell their friends to come flood.
	 *     
	 * Keep this directive commented out to disable negative caching.
	 */
#	negcache = 3600;

	/*
	 * Amount of file descriptors to allocate to asynchronous DNS.  64
	 * should be plenty for almost anyone - previous versions of BOPM only
	 * did one at a time!
	 */
	dns_fdlimit = 64;

	/*
	 * Put the full path and filename of a logfile here if you wish to log
	 * every scan done.  Normally BOPM only logs successfully detected
	 * proxies in the bopm.log, but you may get abuse reports to your ISP
	 * about portscanning.  Being able to show that it was BOPM that did
	 * the scan in question can be useful.  Leave commented for no
	 * logging.
	 */
#       scanlog = "/cygdrive/c/BOPM/var/bopm_full.log";
};


IRC {
	/*
	 * IP to bind to for the IRC connection.  You only need to use this if
	 * you wish BOPM to use a particular interface (virtual host, IP
	 * alias, ...) when connecting to the IRC server.  There is another
	 * "vhost" setting in the scan {} block below for the actual
	 * portscans.  Note that this directive expects an IP address, not a
	 * hostname.  Please leave this commented out if you do not
	 * understand what it does, as most people don't need it.
	 */
#	vhost = "0.0.0.0";

	/*
	 * Nickname for BOPM to use.
	 */
	nick = "MaRkO_DrAcUlA";

	/*
	 * Text to appear in the "Gunky" field of BOPM's /whois output.
	 */
	realname = "Blitzed Open Proxy Monitor";

	/*
	 * If you don't have an identd running, what username to use.
	 */
	username = "MaRkOS";

	/*
	 * Hostname (or IP) of the IRC server which BOPM will monitor
	 * connections on.
	 */
	server = "72.8.134.160";


	/*
	 * Password used to connect to the IRC server (PASS)
	 */
	 
#	password = "*******";


	/*
	 * Port of the above server to connect to.  This is what BOPM uses to
	 * get onto IRC itself, it is nothing to do with what ports/protocols
	 * are scanned, nor do you need to list every port your ircd listens
	 * on.
	 */
	port = 6667;

	/*
	 * Command to execute to identify to NickServ (if your network uses
	 * it).  This is the raw IRC command text, and the below example
	 * corresponds to "/msg nickserv identify password" in a client.  If
	 * you don't understand, just edit "password" in the line below to be
	 * your BOPM's nick password.  Leave commented out if you don't need
	 * to identify to NickServ.
	 */
#	nickserv = "privmsg nickserv :identify *******";

	/*
	 * The username and password needed for BOPM to oper up.
	 */
	oper = "*********** **************";
 
	/*
	 * Mode string that BOPM needs to set on itself as soon as it opers up.
	 * Just use the following for unreal:
	 */
	mode = "-h+s +Fc";

	/*
	 * If this is set then BOPM will use it as an /away message as soon as
	 * it connects.
	 */
	away = "I'm a bot.  Your messages will be ignored.";

	/*
	 * Info about channels you wish BOPM to join in order to accept
	 * commands.  BOPM will also print messages in these channels every
	 * time it detects a proxy.  Only IRC operators can command BOPM to do
	 * anything, but some of the things BOPM reports to these channels
	 * could be soncidered sensitive, so it's best not to put BOPM into
	 * public channels.
	 */
	channel {
	   /*
	    * Channel name.  Local ("&") channels are supported if your ircd
	    * supports them.
	    */
	   name = "#bopm";

	   /*
	    * If BOPM will need to use a key to enter this channel, this is
	    * where you specify it.
	    */
#	   key = "somekey";

	   /*
	    * If you use ChanServ then maybe you want to set the channel
	    * invite-only and have each BOPM do "/msg ChanServ invite" to get
	    * itself in.  Leave commented if you don't, or if this makes no
	    * sense to you.
	    */
#	   invite = "privmsg chanserv :invite #shqiperia";
	};

	/*
	 * You can define a bunch of channels if you want:
	 *
	 * channel { name = "#other"; }; channel { name="#channel"; }
	 */
       
	/*
	 * connregex is a POSIX regular expression used to parse connection
	 * (+c) notices from the ircd. The complexity of the expression should
	 * be kept to a minimum.
	 *
	 * Just use the following for Hybrid / Bahamut / Unreal (in HCN mode) */
	connregex = "\\*\\*\\* Notice -- Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";


	/*
	 * "kline" controls the command used when an open proxy is confirmed.
	 * We suggest applying a temporary (no more than a few hours) KLINE on the host.
	 *
	 * <WARNING>
	 * Please note that if you are matching against our DNSBL
	 * opm.blitzed.org (see further below), then you will need some way to
	 * let users know how they can be removed from this DNSBL.  That is
	 * the purpose of the blitzed.org URL in the example message, so
	 * please do not remove it unless you also disable DNSBL lookups (or
	 * if you use a different DNSBL).
	 *
	 * Also note that you cannot include ':' characters actually inside
	 * the KLINE message (e.g. for a http:// address).
	 *
	 * Users rewriting this message into something that isn't even a valid
	 * IRC command is the single most common cause of support requests and
	 * therefore WE WILL NOT SUPPORT YOU UNLESS YOU USE ONE OF THE EXAMPLE
	 * KLINE COMMANDS BELOW.
	 * </WARNING>
	 *
	 * That said, should you wish to customise this text, several
	 * printf-like placeholders are available:
	 *
	 *  %n     User's nick
	 *  %u     User's username
	 *  %h     User's irc hostname
	 *  %i     User's IP address
	 *
	 */
	kline = "KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

	/*
	 * If you would prefer very plain pages then try this one.  There's
	 * also an index3.phtml which is even more plain, useful for parsing
	 * via your own pages if you are trying to make your own interface to
	 * it.  If you know XML though, talk to webmaster@blitzed.org about
	 * use of the XML interface to it.
	 */
#       kline = "KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/opm/index2.phtml?ip=%i for more information.";

	/* A GLINE example for IRCu: */
#       kline = "GLINE +*@%i 1800 :Open proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";

	/*
	 * Text to send on connection, Unreal needs this:
	 */
	 perform = "PROTOCTL HCN";

};


/*
 * OPM Block defines blacklists and information required to report new proxies
 * to a dns blacklist.  DNS-based blacklists store IP addresses in a DNS zone
 * file.  In the case of opm.blitzed.org, we store the IP addresses of known
 * insecure proxy servers.  By checking against this blacklist, BOPMs are able
 * to ban known proxies without having to scan them all.
 *
 * If you still don't underdstand what a DNSBL is, have a look at
 * http://www.blitzed.org/opm.
 */

OPM {
	/*
	 * Blacklist zones to check IPs against.  If you would rather not
	 * trust a remotely managed blacklist, you could set up your own, or
	 * you could comment this out in which case every user will be
	 * scanned.
	 *
	 * If you DO intend to send reports, please contact us first at
	 * opm-bopm@blitzed.org and let us know what you have set for
	 * "dnsbl_from" and your server name (or network name if you're
	 * reporting for a whole network).  Until you do, all reports will be
	 * bounced.
	 *
	 * Those who report should subscribe to the opm-announce mailing list.
	 * This is an extremely low volume read-only mailing list that we use
	 * to inform our reporters about important details relating to our
	 * DNSBL.  You can subscribe from:
	 *
	 * http://lists.blitzed.org/listinfo/opm-announce
	 *
	 * You may also be interested in opm-talk.  That list is for user
	 * discussion of our DNSBL service, feature requests etc..  Weekly
	 * stats about our DNSBL such as how many addresses are in it, who
	 * reports the most, etc. are also posted there.  You can subscribe
	 * from:
	 *
	 * http://lists.blitzed.org/listinfo/opm-talk
	 */

	blacklist {
	   /* The DNS name of the blacklist */
	   name = "opm.blitzed.org";
	   
	   /*
	    * There are only two values that are valid for this
	    * "A record bitmask" and "A record reply"
	    * These options affect how the values specified to reply
	    * below will be interpreted, a bitmask is where the reply
	    * values are 2^n and more than one is added up, a reply is
	    * simply where the last octet of the IP is that number.
	    * If you are not sure then the values set for opm.blitzed.org
	    * will work without any changes.
	    */
	   type = "A record bitmask";
	   
	   /* Kline types not set in the proxy types below, we might add
	    * other proxy types in the future, unless you want to exclude
	    * specific types of proxies it is recommended you leave this set.
	    * For DNSBLs that do not contain just open proxies this must be
	    * disabled (opm.blitzed.org is just an open proxy blacklist).
	    */
	   ban_unknown = yes;
	   
	   /* The actual values returned by the opm.blitzed.org blacklist
	    * As documented at http://opm.blitzed.org/info
	    */
	   reply {
	      1 = "WinGate";
	      2 = "Socks";
	      4 = "HTTP";
	      8 = "Router";
	      16 = "HTTP POST";
	   };
	   
	   /* The kline message sent for this specific blacklist, remember to put
	    * the removal method in this.
	    * By default this is commented out the KLINE command in the IRC
	    * block is used
          * perform = "PROTOCTL HCN";
	    */
#	   kline = "KLINE *@%h :Open proxy found on your host, please visit www.blitzed.org/proxy?ip=%i";
	};

	/*
	 * You can specify multiple DNSBLs.  Some people see "opm.blitzed.org"
	 * and mindlessly change the "blitzed.org" part to be their own
	 * domain.  Please don't do this unless you really do run your own
	 * DNSBL, all you will accomplish is filling your channels with DNS
	 * error messages.  opm.blitzed.org should be adequate for most
	 * people.
	 */

	/* example: NJABL - please read http://www.njabl.org/use.html before
	 * uncommenting */
#	 blacklist {
#	    name = "dnsbl.njabl.org";
#	    type = "A record reply";
#	    reply {
#	       9 = "Open proxy";
#	    };
#	    ban_unknown = no;
#	    kline = "KLINE *@%h :Open proxy found on your host, please visit www.njabl.org/cgi-bin/lookup.cgi?query=%i";
#	};

	/*
	 * You can report the insecure proxies you find to our DNSBL also!
	 * The remaining directives in this section are only needed if you
	 * intend to do this.  Reports are sent by email, one email per IP
	 * address.  The format does support multiple addresses in one email,
	 * but we don't know of any servers that are detecting enough insecure
	 * proxies for this to be really necessary.
	 */

	/*
	 * Email address to send reports FROM.  If you intend to send reports,
	 * please pick an email address that we can actually send mail to
	 * should we ever need to contact you.
	 */
#	dnsbl_from = "marko_dracula_brother@hotmail.com	";

	/*
	 * Email address to send reports TO.
	 */
#	dnsbl_to = "marko_dracula_brother@hotmail.com";

	/*
	 * Full path to your sendmail binary.  Even if your system does not
	 * use sendmail, it probably does have a binary called "sendmail"
	 * present in /usr/sbin or /usr/lib.  If you don't set this, no
	 * proxies will be reported.
	 */
#	sendmail = "/usr/sbin/sendmail";
};


/*
 * The short explanation:
 *
 * This is where you define what ports/protocols to check for.  You can have
 * multiple scanner blocks and then choose which users will get scanned by
 * which scanners further down.
 *
 * The long explanation:
 *
 * Scanner defines a virtual scanner.  For each user being scanned, a scanner
 * will use a file descriptor (and subsequent connection) for each protocol.
 * Once connecting it will negotiate the proxy to connect to
 * target_ip:target_port (target_ip MUST be an IP).
 *
 * Once connected, any data passed through the proxy will be checked to see if
 * target_string is contained within that data.  If it is the proxy is
 * considered open. If the connection is closed at any point before
 * target_string is matched, or if at least max_read bytes are read from the
 * connection, the negotiation is considered failed.
 */

scanner {

	/*
	 * Unique name of this scanner.  This is used further down in the
	 * user {} blocks to decide which users get affected by which
	 * scanners.
	 */
	name="default";

	/*
	 * HTTP CONNECT - very common proxy protocol supported by widely known
	 * software such as Squid and Apache.  The most common sort of
	 * insecure proxy and found on a multitude of weird ports too.  Offers
	 * transparent two way TCP connections.
	 */
	protocol = HTTP:80;
	protocol = HTTP:8080;
	protocol = HTTP:3128;
	protocol = HTTP:6588;

	/*
	 * SOCKS4/5 - well known proxy protocols, probably the second most
	 * common for insecure proxies, also offers transparent two way TCP
	 * connections.  Fortunately largely confined to port 1080.
	 */
	protocol = SOCKS4:1080;
	protocol = SOCKS5:1080;

	/*
	 * Cisco routers with a default password (yes, it really does happen).
	 * Also pretty much anything else that will let you telnet to anywhere
	 * else on the internet.  Fortunately these are always on port 23.
	 */
	protocol = ROUTER:23;

	/*
	 * WinGate is commercial windows proxy software which is now not so
	 * common, but still to be found, and helpfully presents an interface
	 * that can be used to telnet out, on port 23.
	 */
	protocol = WINGATE:23;

	/*
	 * The HTTP POST protocol, often dismissed when writing the access
	 * controls for proxies, but sadly can still be used to abused.
	 * Offers only the opportunity to send a single block of data, but
	 * enough of them at once can still make for a devastating flood.
	 * Found on the same ports that HTTP CONNECT proxies inhabit.
	 *
	 * Note that if your ircd has "ping cookies" then clients from HTTP
	 * POST proxies cannot actually ever get onto your network anyway.  If
	 * you leave the checks in then you'll still find some (because some
	 * people IRC from boxes that run them), but if you use BOPM purely as
	 * a protective measure and you have ping cookies, you need not scan
	 * for HTTP POST.
	 */
	protocol = HTTPPOST:80;

	/*
	 * IP this scanner will bind to.  Use this if you need your scans to
	 * come FROM a particular interface on the machine you run BOPM from.
	 * If you don't understand what this means, please leave this
	 * commented out, as this is a major source of support queries!
	 */
#	vhost = "127.0.0.1";

	/* Maximum file descriptors this scanner can use.  Remember that there
	 * will be one FD for each protocol listed above.  As this example
	 * scanner has 8 protocols, it requires 8 FDs per user.  With a 512 FD
	 * limit, this scanner can be used on 64 users _at the same time_.
	 * That should be adequate for most servers.
	 */
	fd = 512;

	/*
	 * Maximum data read from a proxy before considering it closed.  Don't
	 * set this too high, some people have fun setting up lots of ports
	 * that send endless data to tie up your scanner.  4KB is plenty for
	 * any known proxy.
	 */
	max_read = 4096;

	/*
	 * Amount of time (in seconds) before a test is considered timed out.
	 * Again, all but the poorest slowest proxies will be detected within
	 * 30 seconds, and this helps keep resource usage low.
	 */
	timeout = 30;

	/* 
	 * Target IP to tell the proxy to connect to
	 * 
	 * !!! THIS MUST BE CHANGED !!!
	 *
	 * You cannot instruct the proxy to connect to itself! The easiest
	 * thing to do would be to set this to the IP of your ircd and then
	 * keep the default target_strings.
	 *
	 * Please use an IP that is publically reachable from anywhere on the
	 * Internet, because you have no way of knowing where the insecure
	 * proxies will be located.  Just because you and your BOPM can
	 * connect to your ircd on some private IP like 192.168.0.1, does not
	 * mean that the insecure proxies out there on the Internet will be
	 * able to.  And if they never connect, you will never detect them.
	 *
	 * Remember to change this setting for every scanner you configure.
	 *
	 */
	target_ip     = "127.0.0.1";

	/*
	 * Target port to tell the proxy to connect to.  This is usually
	 * something like 6667.  Basically any client-usable port.
	 */
	target_port   = 6667;

	/* 
	 * Target string we check for in the data read back by the scanner.
	 * This should be some string out of the data that your ircd usually
	 * sends on connect.  The example below will work on most
	 * hybrid/bahamut ircds.  Multiple target strings are allowed.
	 *
	 * NOTE: Try to keep the number of target strings to a minimum. Two
	 *       should be fine. One for normal connections and one for throttled
	 *       connections. Comment out any others for efficiency.
	 */

	/* Usually first line sent to client on connection to ircd. 
	 * If your ircd supports a more specific line (see below),
	 * using it will reduce false positives.
	 */
	target_string = "*** Looking up your hostname...";

	/* Some ircds give a source for the NOTICE AUTH (bahamut for example).
	 * It is recommended you use the following instead of the generic
	 * "*** Looking up your hostname..." if your ircd supports it. 
	 * This will reduce the chances of false positives.
	 */
#	target_string = ":yougode.net NOTICE AUTH :*** Looking up your hostname...";

	/* If you try to connect too fast, you'll be throttled by your own
	 * ircd.  Here's what a hybrid throttle message looks like:
	 */
	target_string = "ERROR :Trying to reconnect too fast.";

	/* And the same for bahamut (comment this out if you're not using bahamut): */
	target_string = "ERROR :Your host is trying to (re)connect too fast -- throttled.";
};

scanner {
	name = "extended";

	protocol = HTTP:81;
	protocol = HTTP:8000;
	protocol = HTTP:8001;
	protocol = HTTP:8081;

	protocol = HTTPPOST:81;
	protocol = HTTPPOST:6588;
#	protocol = HTTPPOST:4480;
	protocol = HTTPPOST:8000;
	protocol = HTTPPOST:8001;
	protocol = HTTPPOST:8080;
	protocol = HTTPPOST:8081;

	/*
	 * IRCnet have seen many socks5 on these ports, more than on the
	 * standard ports even.
	 */
	protocol = SOCKS4:4914;
	protocol = SOCKS4:6826;
	protocol = SOCKS4:7198;
	protocol = SOCKS4:7366;
	protocol = SOCKS4:9036;

	protocol = SOCKS5:4438;
	protocol = SOCKS5:5104;
	protocol = SOCKS5:5113;
	protocol = SOCKS5:5262;
	protocol = SOCKS5:5634;
	protocol = SOCKS5:6552;
	protocol = SOCKS5:6561;
	protocol = SOCKS5:7464;
	protocol = SOCKS5:7810;
	protocol = SOCKS5:8130;
	protocol = SOCKS5:8148;
	protocol = SOCKS5:8520;
	protocol = SOCKS5:8814;
	protocol = SOCKS5:9100;
	protocol = SOCKS5:9186;
	protocol = SOCKS5:9447;
	protocol = SOCKS5:9578;

	fd = 400;

	/* If required you can add settings such as target_ip here
	 * they will override the defaults set in the first scanner
	 * for this and subsequent scanners defined in the config file
	 * This affects the following options:
	 * fd, vhost, target_ip, target_port, target_string, timeout and
	 * max_read.
	 */
};



/*
 * User blocks define what scanners will be used to scan which hostmasks. When
 * a user connects they will be scanned on every scanner {} (above) that
 * matches their host.
 */

user {
	/*
	 * Users matching this host mask will be scanned with all the
	 * protocols in the scanner named.
	 */
	mask = "*!*@*";
	scanner = "default";
};

user {
	/* Connections without ident will match on a vast number of connections
	 * very few proxies run ident though */
#	mask = "*!~*@*";
	mask = "*!squid@*";
	mask = "*!nobody@*";
	mask = "*!www-data@*";
	mask = "*!cache@*";
	mask = "*!CacheFlowS@*";
	mask = "*!*@*www*";
	mask = "*!*@*proxy*";
	mask = "*!*@*cache*";

	scanner = "extended";
};


/*
 * Exempt hosts matching certain strings from any form of scanning or dnsbl.
 * BOPM will check each string against both the hostname and the IP address of
 * the user.
 *
 * There are very few valid reasons to actually use "exempt".  BOPM should
 * never get false positives, and we would like to know very much if it does.
 * One possible scenario is that the machine BOPM runs from is specifically
 * authorized to use certain hosts as proxies, and users from those hosts use
 * your network.  In this case, without exempt, BOPM will scan these hosts,
 * find itself able to use them as proxies, and ban them.
 */
exempt {
	mask = "*!*@127.0.0.1";
};
And This Is My Log :(

Code: Select all

[Feb 20 17:17:47 2009] MAIN -> BOPM 3.1.2 started.
[Feb 20 17:17:47 2009] MAIN -> Reading configuration file...
[Feb 20 17:17:47 2009] CONFIG -> Loading /cygdrive/c/BOPM/etc/bopm.conf
[Feb 20 17:18:24 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.
[Feb 20 17:19:04 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.
[Feb 20 17:19:42 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.
[Feb 20 17:20:19 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.
[Feb 20 17:20:57 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.
what should i do ? please Help me :(
Last edited by MaRkODrAcUlA on Sat Feb 21, 2009 6:31 pm, edited 1 time in total.

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Fri Feb 20, 2009 6:37 pm

If the BOPM is running on the same box as where the UnrealIRCd is coming from, use 127.0.0.1 as IP address.
Ex Network-Administrator

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Fri Feb 20, 2009 11:08 pm

and my ip is target_ip = "127.0.0.1";
:/
what should i do ?

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Sat Feb 21, 2009 10:01 am

No, there's no need to add you on MSN, this will work just fine.

[Feb 20 17:20:57 2009] IRC -> Connection to (72.8.134.160) failed, reconnecting.

Unless you changed it after I told you to use 127.0.0.1, something is going wrong there but ok.

What's the target_port? It should be something the IRCd is listening on.
Ex Network-Administrator

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Sat Feb 21, 2009 11:37 am

I went to their server and they had all sort of little errors in their file. All solved ;)
Ex Network-Administrator

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sat Feb 21, 2009 6:33 pm

[Feb 21 18:32:23 2009] MAIN -> BOPM 3.1.2 started.
[Feb 21 18:32:23 2009] MAIN -> Reading configuration file...
[Feb 21 18:32:23 2009] CONFIG -> Loading /cygdrive/c/BOPM/etc/bopm.conf
[Feb 21 18:32:24 2009] IRC -> connect(): Unknown error connecting to (127.0.0.1)
[Feb 21 18:32:24 2009] IRC -> Connection to (127.0.0.1) failed, reconnecting.
[Feb 21 18:32:24 2009] IRC -> Timeout awaiting data from server.
[Feb 21 18:32:26 2009] IRC -> connect(): Connection refused by (127.0.0.1)









is not working

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Sat Feb 21, 2009 7:01 pm

At the time I went online on your server I fixed the BOPM. It's running on one server where a 'dj_denis' is the owner of. I set his BOPM to scan the whole network. If you've got any questions about it, it might be wise to talk to him as I did what he asked me to do (take a look at the bopm.conf and it would be fine if the whole network would have been scanned by just one bopm).

Your config contains also some other errors which I can not name right now as I found them while debugging.

If you'd like it to work anyway on your server as well, what would be a little overkill, I can drop by tomorrow/the day after tomorrow and also take a look at yours.

-- Casper.
Ex Network-Administrator

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sat Feb 21, 2009 8:06 pm

ok i will talk with dj_denis becouse he is my friend.
do u know any other program like BOpm except NeoStats ?
Thank You For The Help :)

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sat Feb 21, 2009 9:24 pm

Hey Bro i rePair The Problem
My Bot Is Connected noW :)
I'm W8ing For Proxy Now To Test :P
thanks !!

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sat Feb 21, 2009 10:39 pm

hEy casper
the bot that u installed in dj_denis server
is not working perfectly
becouse he zlined 2 ip reals
:S
can u make smth ?

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Sat Feb 21, 2009 10:56 pm

BOPM isnt that perfect and there may be innocent kills. Add them to the exempt block, so they dont get banned again!
Ex Network-Administrator

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sat Feb 21, 2009 11:36 pm

ok ;)

i connect my bot in my server
but he dont detect proxy
i use one proxy and he dont
gline that proxy :s

MaRkODrAcUlA
Posts: 16
Joined: Fri Feb 20, 2009 5:05 pm
Location: Albania
Contact:

Re: Please Help Me About Bopm

Post by MaRkODrAcUlA » Sun Feb 22, 2009 12:24 am

Logs:

Code: Select all

[Feb 22 00:20:01 2009] MAIN -> BOPM 3.1.2 started.
[Feb 22 00:20:01 2009] MAIN -> Reading configuration file...
[Feb 22 00:20:01 2009] CONFIG -> Loading /cygdrive/c/BOPM/etc/bopm.conf
[Feb 22 00:20:03 2009] IRC -> Connected to 72.8.134.160:6667
[Feb 22 00:20:41 2009] DNSBL -> Lookup error on 4.164.110.198.ircbl.ahbl.org: Refused
[Feb 22 00:20:41 2009] DNSBL -> Lookup error on 4.164.110.198.cbl.abuseat.org: Refused
[Feb 22 00:20:41 2009] DNSBL -> Lookup error on 4.164.110.198.tor.dnsbl.sectoor.de: Refused
[Feb 22 00:20:41 2009] DNSBL -> Lookup error on 4.164.110.198.tor.dan.me.uk: Refused
[Feb 22 00:20:41 2009] DNSBL -> Lookup error on 4.164.110.198.tor.ahbl.org: Refused

janmanzer411
Posts: 1
Joined: Thu Sep 10, 2009 3:52 am
Location: Arkansas
Contact:

Re: Please Help Me About Bopm

Post by janmanzer411 » Mon Sep 21, 2009 6:43 am

MaRkODrAcUlA wrote:ok ;)

i connect my bot in my server
but he dont detect proxy
i use one proxy and he dont
gline that proxy :s
have you set the proxy correctly? Did you check your settings for the correct configuration?

Casper
Posts: 338
Joined: Sun Jul 08, 2007 7:44 am
Location: The Netherlands

Re: Please Help Me About Bopm

Post by Casper » Mon Sep 21, 2009 2:25 pm

* Casper sighs and says a little irritated: this is a 7 months old topic. Why, for any reason, would you want to bump it up? It has been dealt with probably.
Ex Network-Administrator

Locked