Unable to link Unreal 6.0.7 with Anope-2.0.12

[KpuCko]

Hello guys,
This should be quite trivial but I'm fighting with it last two days and it gets me crazy.

Here is the config:

Code: Select all

/* Special SSL/TLS servers-only port for linking */
listen {
        ip *;
        port 6900;
        options { tls; serversonly; }
}

Code: Select all

/* The link block for services is usually much simpler.
 * For more information about what Services are,
 * see https://www.unrealircd.org/docs/Services
 */
link services.ma3x.org
{
    incoming {
        mask [email protected];
}

    password "llMRa4fVV6Nq6ZrgJdaiv2yz";
    class servers;
    verify-certificate no;
}

Code: Select all

/* U-lines give other servers (even) more power/commands.
 * If you use services you must add them here.
 * NEVER put the name of an UnrealIRCd server here!!!
 */
ulines {
        services.ma3x.org;
}

Code: Select all

/* Network configuration */
set {
        network-name            "Ma3x";
        default-server          "irc.ma3x.org";
        services-server         "services.ma3x.org";

Code: Select all

uplink
{
        /*
         * The IP or hostname of the IRC server you wish to connect Services to.
         * Usually, you will want to connect Services over 127.0.0.1 (aka localhost).
         *
         * NOTE: On some shell providers, this will not be an option.
         */
        host = "192.168.0.9"

        /*
         * Enable if Services should connect using IPv6.
         */
        ipv6 = no

        /*
         * Enable if Services should connect using SSL.
         * You must have an SSL module loaded for this to work.
         */
        ssl = yes

        /*
         * The port to connect to.
         * The IRCd *MUST* be configured to listen on this port, and to accept
         * server connections.
         *
         * Refer to your IRCd documentation for how this is to be done.
         */
        port = 6900

        /*
         * The password to send to the IRC server for authentication.
         * This must match the link block on your IRCd.
         *
         * Refer to your IRCd documentation for more information on link blocks.
         */
        password = "llMRa4fVV6Nq6ZrgJdaiv2yz"
}

Code: Select all

/*
 * [REQUIRED] Server Information
 *
 * This section contains information about the Services server.
 */
serverinfo
{
        /*
         * The hostname that Services will be seen as, it must have no conflicts with any
         * other server names on the rest of your IRC network. Note that it does not have
         * to be an existing hostname, just one that isn't on your network already.
         */
        name = "services.ma3x.org"

Code: Select all

/*
 * [REQUIRED] Network Information
 *
 * This section contains information about the IRC network that Services will be
 * connecting to.
 */
networkinfo
{
        /*
         * This is the name of the network that Services will be running on.
         */
        networkname = "Ma3x"

I really don;t know what else to check.
The error is as follow:

Code: Select all

[Apr 05 06:15:57 2023] Successfully connected to uplink #1 192.168.0.9:6900
[Apr 05 06:15:58 2023] ERROR: Closing Link: services.ma3x.org[jest.lab.lan] (Link denied (No link block found with your server name or link::incoming::mask did not match))
[Apr 05 06:15:58 2023] Received ERROR from uplink: Closing Link: services.ma3x.org[jest.lab.lan] (Link denied (No link block found with your server name or link::incoming::mask did not match))

Please help me to solve it.
Thanks

[Syzop]

In your UnrealIRCd conf you have a bit of an unusual mask that can't be right:

Code: Select all

incoming {
        mask [email protected];
}

Change that to:

Code: Select all

incoming {
        mask *@192.168.0.126;
}

(if 192.168.0.126 is really the IP that services is connecting from)

Then REHASH the ircd and try linking again.