start unrealirc
Posted: Thu Apr 01, 2004 2:16 am
i have my .conf configure, how can i start it, if im behind router n firewall can it still be run?
Page 1 of 1
Posted: Thu Apr 01, 2004 3:33 am
Yes, assuming your setup your firewall and router to allow the connections to come through.
Posted: Thu Apr 01, 2004 1:55 pm
what port should i put so they could bypass and connect to it?
Posted: Thu Apr 01, 2004 9:06 pm
Whichever ports you specified in unrealircd.conf
Posted: Fri Apr 02, 2004 12:33 am
like on what line?
Posted: Fri Apr 02, 2004 12:44 am
Look for something like:
The 6667 tells you the port number.
Obviously you will need to setup a firewall/router port for each port number listed in listen.
Code: Select all
listen *:6667;Obviously you will need to setup a firewall/router port for each port number listed in listen.
Posted: Fri Apr 02, 2004 8:07 am
Sorry, but your firewalling/routing problem is not exactly an Unreal issue, therefore this is not the best place to ask about it. But you can ask Google, if you want.
Posted: Sat Apr 03, 2004 12:40 am
If your behind a router/firewall you need to forward whatever ports unreal is listening on in order for connections to pass through. If you have no clue what I'm talking about then you should do some looking through your router manual and read up a bit on both the ircd and operation of your router. 
Posted: Tue Apr 06, 2004 1:28 pm
i know wat u talking about, but don't know what port i should bypass though!