UnrealIRCd Forums

Posted: **Sat Dec 03, 2005 9:52 pm**

Hi @ll

I have following problem:

When i start Unrealircd in kombination with Anope i get the following warning:

=== *** Notice -- WARNING: Remote doesnt have link::options::zip set. Compression disabled.
=== *** Notice -- (link) Link sjd.myftp.org -> services.sjd.myftp.org[@192.168.1.1.1443] established
=== *** Notice -- Link services.sjd.myftp.org -> sjd.myftp.org is now synced [secs: 0 recv: 1.470 sent: 2.237]

And i cannot find out what that means... Perhaps one of you can help me

Thank you

SaphirJD

Posted: **Sun Dec 04, 2005 1:07 am**

And anoterh question too...

What must i configure to geht the global IRC Operator Status? Or Service Operator? How can i get all the rigths for my IRC Network?

Somebody can help me? Please?

SaphirJD

Posted: **Sun Dec 04, 2005 9:49 am**

1. You can't use the zip option to link to services.
2. You need to oper yourself first. Add an oper block http://www.vulnscan.org/UnrealIRCd/unre ... #operblock and login (/oper <login> <password>).

Posted: **Sun Dec 04, 2005 1:46 pm**

Thanks it worked

but ther is a last question... but if i try to get a user an automatical sop status with the command
/chanserv ACCESS <#channel> ADD <nick> Levelnumber
i get the following message....

ChanServ - You can't use this command.
ChanServ - Use the AOP, SOP and VOP commands instead.
ChanServ - Type /msg ChanServ HELP command for more information.

Whats wrong with that?

SaphirJD

And one question.... in the oper settings
oper <name> {
from {
userhost <hostmask>;
userhost <hostmask>;

i have entered in the user host *,

How can i find out what real host i have?

Posted: **Sun Dec 04, 2005 1:59 pm**

To add someone to auto-sop u type:

/msg chanserv sop <chan> add <nick>

My Anope responds:

15:03:29 04/12/2005 [ ChanServ ] Syntax: SET channel XOP {ON | OFF}
15:03:29 04/12/2005 [ ChanServ ]
15:03:29 04/12/2005 [ ChanServ ] Enables or disables the xOP lists system for a channel.
15:03:29 04/12/2005 [ ChanServ ] When XOP is set, you have to use the AOP/SOP/VOP
15:03:29 04/12/2005 [ ChanServ ] commands in order to give channel privileges to
15:03:29 04/12/2005 [ ChanServ ] users, else you have to use the ACCESS command.
15:03:29 04/12/2005 [ ChanServ ]
15:03:29 04/12/2005 [ ChanServ ] Technical Note: when you switch from access list to xOP
15:03:29 04/12/2005 [ ChanServ ] lists system, your level definitions and user levels will be
15:03:29 04/12/2005 [ ChanServ ] changed, so you won't find the same values if you
15:03:29 04/12/2005 [ ChanServ ] switch back to access system!
15:03:29 04/12/2005 [ ChanServ ]
15:03:29 04/12/2005 [ ChanServ ] You should also check that your users are in the good xOP
15:03:29 04/12/2005 [ ChanServ ] list after the switch from access to xOP lists, because the
15:03:29 04/12/2005 [ ChanServ ] guess is not always perfect... in fact, it is not recommended
15:03:29 04/12/2005 [ ChanServ ] to use the xOP lists if you changed level definitions with
15:03:29 04/12/2005 [ ChanServ ] the LEVELS command.
15:03:29 04/12/2005 [ ChanServ ]
15:03:29 04/12/2005 [ ChanServ ] Switching from xOP lists system to access list system
15:03:29 04/12/2005 [ ChanServ ] causes no problem though.

So if you want to use access lists vs xOP, u have to:

/msg chanserv set <channel> XOP OFF

- sChutt

Posted: **Mon Dec 05, 2005 9:15 pm**

Everything works fine now

But when i end the anope process regulary I get this error mesage :/

PANIC! waiting=-4 (Segmentation fault)
Backtrace: not available on this windows
Services terminating on signal 11

And i cannot resolve it.... if i change the ports i get the following message:

*** LocOps -- Link denied for services.sjd.myftp.org([email protected]) (Username 'unknown' didn't match 'SaphirJD') [@192.168.1.1.2337]

Can i send one of you my configs to take a look at it? I don't know what can i do more Sad

What should i do? Sad

Here the parts from my confs...

Anope:

RemoteServer sjd.myftp.org 6667 "thepassword"
ServerName "services.sjd.myftp.org"
ServiceUser "[email protected]"

Unrealirc:

admin {
"SaphirJD";

oper SaphirJD {
class clients;
from {
userhost [email protected];
userhost [email protected];
userhost [email protected];

listen sjd.myftp.org:6667
{
options
{
clientsonly;
};
};

listen *:8067;
listen *:6667;

link services.sjd.myftp.org
{
username *;
hostname 127.0.0.1;
bind-ip SaphirJD;
port 6667;
hub *;
password-connect "thepassword";
password-receive "thepassword";
class servers;
options {
nohostcheck;
/* Note: You should not use autoconnect when linking services */
zip;

ulines {
services.sjd.myftp.org;
stats.sjd.myftp.org;

And no matter what i try to change... i get this ugly message back :/

UnrealIRCd Forums

Strange Warning Message at start from UnrealIRCD 323

Strange Warning Message at start from UnrealIRCD 323