I locked myself out channel #opers.

If your UnrealIRCd is up and running but you have a question about it, then use this forum.
(NOT for installation or connecting issues! Use the other forum instead.)

Moderator: Supporters

Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

I locked myself out channel #opers.

Post by Rexodus »

Hi there.

I'm brandnew to UnrealIRCd and in the first day I managed to mess up real bad! I turned #opers into > 0 [+sntizOPZCc] and after a while I rebooted the computer with the last client in that channel :roll: . Good learning moment but I don't see the exit. I need to remove the 'i' somehow.

I've been searching and trying for a while but even the Oper doesn't have enough power to force join that channel as far as I can tell? I tried to invite myself but it says I'm not in that channel. Duh! I tried to remove the whole channel but afaics there is no feature for that. I tried to /mode that channel -i without any result. Now I'm out of ideas.

Does anyone have a solution to this problem before I re-install the whole thing? According to Google, I seem to be the only one on this planet who managed to pull off such stupidity.

Many thanks in advance!
Valware
Official supporter
Posts: 38
Joined: Wed Mar 31, 2021 3:17 am
Location: Internet
Contact:

Re: I locked myself out channel #opers.

Post by Valware »

hi

firstly, check your unrealircd config that your opertype is netadmin. don't forget you need to actually "/oper opername password" on IRC after you've connected.

if you make any changes, you should be able to update the changes by using the command "/rehash"
once you've got that and you're opered (should have usermode +o at this point) you should be able to use "/sajoin yourname #channel"

you can also try "/samode #channel -i"

good luck
Got an idea for a module? Don't be shy! Come talk to me on #unreal-support
Like the support I provide? Consider supporting me with a donation.
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

Valware wrote: Tue Aug 24, 2021 4:32 am hi

firstly, check your unrealircd config that your opertype is netadmin. don't forget you need to actually "/oper opername password" on IRC after you've connected.

if you make any changes, you should be able to update the changes by using the command "/rehash"
once you've got that and you're opered (should have usermode +o at this point) you should be able to use "/sajoin yourname #channel"

you can also try "/samode #channel -i"

good luck
TnX for your reply. And I tried that too. I have (+iostwxz) but /sa* doesn't work here.

My version is UnrealIRCd-5.2.1.1 and I installed it from the TARball on Ubuntu server 18 LTS.
Valware
Official supporter
Posts: 38
Joined: Wed Mar 31, 2021 3:17 am
Location: Internet
Contact:

Re: I locked myself out channel #opers.

Post by Valware »

final thing I can think of then, specifically for unrealircd, is change your opertype in the unrealircd config from:
"netadmin"
to:
"netadmin-with-override"

then rehash, and you should have access to /sacmds
Got an idea for a module? Don't be shy! Come talk to me on #unreal-support
Like the support I provide? Consider supporting me with a donation.
DonTCry
Posts: 50
Joined: Mon Feb 06, 2012 6:01 pm
Contact:

Re: I locked myself out channel #opers.

Post by DonTCry »

If you have usermode +o, try /mode #chan -i
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

Valware wrote: Tue Aug 24, 2021 6:16 am final thing I can think of then, specifically for unrealircd, is change your opertype in the unrealircd config from:
"netadmin"
to:
"netadmin-with-override"

then rehash, and you should have access to /sacmds
Please check those 2 pictures. I hope it explains what I'm doing wrong...

http://blacklist.exposed/data/2021-08-2 ... Window.png
http://blacklist.exposed/data/2021-08-2 ... Window.png
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

DonTCry wrote: Tue Aug 24, 2021 6:17 am If you have usermode +o, try /mode #chan -i
Doesn't work either.
DonTCry
Posts: 50
Joined: Mon Feb 06, 2012 6:01 pm
Contact:

Re: I locked myself out channel #opers.

Post by DonTCry »

can you provide your server IP please?
Valware
Official supporter
Posts: 38
Joined: Wed Mar 31, 2021 3:17 am
Location: Internet
Contact:

Re: I locked myself out channel #opers.

Post by Valware »

Rexodus wrote: Tue Aug 24, 2021 6:54 am
Valware wrote: Tue Aug 24, 2021 6:16 am final thing I can think of then, specifically for unrealircd, is change your opertype in the unrealircd config from:
"netadmin"
to:
"netadmin-with-override"

then rehash, and you should have access to /sacmds
Please check those 2 pictures. I hope it explains what I'm doing wrong...

http://blacklist.exposed/data/2021-08-2 ... Window.png
http://blacklist.exposed/data/2021-08-2 ... Window.png
ahh okay looks like your client doesn't understand the commands and isn't forwarding it to the server perhaps?
try /quote sajoin username #channel
Got an idea for a module? Don't be shy! Come talk to me on #unreal-support
Like the support I provide? Consider supporting me with a donation.
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

Valware wrote: Tue Aug 24, 2021 7:04 am
Rexodus wrote: Tue Aug 24, 2021 6:54 am
Valware wrote: Tue Aug 24, 2021 6:16 am final thing I can think of then, specifically for unrealircd, is change your opertype in the unrealircd config from:
"netadmin"
to:
"netadmin-with-override"

then rehash, and you should have access to /sacmds
Please check those 2 pictures. I hope it explains what I'm doing wrong...

http://blacklist.exposed/data/2021-08-2 ... Window.png
http://blacklist.exposed/data/2021-08-2 ... Window.png
ahh okay looks like your client doesn't understand the commands and isn't forwarding it to the server perhaps?
try /quote sajoin username #channel
Dude! You deserve a statue as big as the Eiffeltower! Thank you very much!
Valware
Official supporter
Posts: 38
Joined: Wed Mar 31, 2021 3:17 am
Location: Internet
Contact:

Re: I locked myself out channel #opers.

Post by Valware »

😁😁
Got an idea for a module? Don't be shy! Come talk to me on #unreal-support
Like the support I provide? Consider supporting me with a donation.
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

Back after dinner. Now I get this error. Seems a Java problem according to Google?


Topic: Opers channel
[24-08-21 10:03:23] Rexodus ([email protected]) has joined #opers
[24-08-21 10:03:23] Topic for #opers: Opers channel
[24-08-21 10:03:23] Topic set by Rexodus () (Mon Aug 23 06:19:56 2021)
[24-08-21 10:03:23] [Users #opers]
[24-08-21 10:03:23] [ Rexodus]
[24-08-21 10:03:23] Irssi: #opers: Total of 1 nicks (0 ops, 0 halfops, 0 voices, 1 normal)
[24-08-21 10:03:23] Channel #opers created Fri Aug 20 05:18:00 2021
[24-08-21 10:03:23] Irssi: Join to #opers was synced in 0 secs
[24-08-21 10:15:01] #opers End of Channel Exception List
[24-08-21 10:15:35] mode/#opers +o Rexodus by Rexodus
[24-08-21 10:15:40] #opers End of Channel Exception List

I was trying to mode -i the channel with no avail. In fact, whatever mode I try to add or remove fails.
k4be
UnrealIRCd coder
Posts: 49
Joined: Sun Jan 09, 2005 12:19 pm
Location: Poland

Re: I locked myself out channel #opers.

Post by k4be »

I don't see any problem with the log you're pasting (but you should also include the command you use for better understanding).
The response "End of Channel Exception List" is a valid response for command "/mode #channel e" (listing channel exceptions) when the exception list is empty. You probably want to use "/mode #opers -i"?
Valware
Official supporter
Posts: 38
Joined: Wed Mar 31, 2021 3:17 am
Location: Internet
Contact:

Re: I locked myself out channel #opers.

Post by Valware »

hi again
after a quick check here https://www.linode.com/docs/guides/usin ... elay-chat/
I can't see that irssi supports a lot of commands, and would seem you have to prefix a lot of commands with the same as before
/quote mode #channel -i
Got an idea for a module? Don't be shy! Come talk to me on #unreal-support
Like the support I provide? Consider supporting me with a donation.
Rexodus
Posts: 9
Joined: Tue Aug 24, 2021 3:36 am

Re: I locked myself out channel #opers.

Post by Rexodus »

Valware wrote: Tue Aug 24, 2021 8:36 am hi again
after a quick check here https://www.linode.com/docs/guides/usin ... elay-chat/
I can't see that irssi supports a lot of commands, and would seem you have to prefix a lot of commands with the same as before
/quote mode #channel -i
Yes! /quote 'mode #opers -i' did the trick. Thank you all very much! :D
Post Reply