These are old archives. They are kept for historic purposes only.
ThangNhoc
Posts: 5 Joined: Thu Mar 25, 2004 6:44 pm
Post
by ThangNhoc » Thu Apr 01, 2004 2:16 am
i have my .conf configure, how can i start it, if im behind router n firewall can it still be run?
codemastr
Former UnrealIRCd head coder
Posts: 811 Joined: Sat Mar 06, 2004 8:47 pm
Location: United States
Contact:
Post
by codemastr » Thu Apr 01, 2004 3:33 am
Yes, assuming your setup your firewall and router to allow the connections to come through.
-- codemastr
ThangNhoc
Posts: 5 Joined: Thu Mar 25, 2004 6:44 pm
Post
by ThangNhoc » Thu Apr 01, 2004 1:55 pm
what port should i put so they could bypass and connect to it?
codemastr
Former UnrealIRCd head coder
Posts: 811 Joined: Sat Mar 06, 2004 8:47 pm
Location: United States
Contact:
Post
by codemastr » Thu Apr 01, 2004 9:06 pm
Whichever ports you specified in unrealircd.conf
-- codemastr
ThangNhoc
Posts: 5 Joined: Thu Mar 25, 2004 6:44 pm
Post
by ThangNhoc » Fri Apr 02, 2004 12:33 am
like on what line?
aquanight
Official supporter
Posts: 862 Joined: Tue Mar 09, 2004 10:47 pm
Location: Boise, ID
Post
by aquanight » Fri Apr 02, 2004 12:44 am
Look for something like:
The 6667 tells you the port number.
Obviously you will need to setup a firewall/router port for each port number listed in listen.
AngryWolf
Posts: 554 Joined: Sat Mar 06, 2004 10:53 am
Location: Hungary
Contact:
Post
by AngryWolf » Fri Apr 02, 2004 8:07 am
Sorry, but your firewalling/routing problem is not exactly an Unreal issue, therefore this is not the best place to ask about it. But you can ask Google, if you want.
FrostByghte
Posts: 2 Joined: Sat Apr 03, 2004 12:32 am
Post
by FrostByghte » Sat Apr 03, 2004 12:40 am
If your behind a router/firewall you need to forward whatever ports unreal is listening on in order for connections to pass through. If you have no clue what I'm talking about then you should do some looking through your router manual and read up a bit on both the ircd and operation of your router.
ThangNhoc
Posts: 5 Joined: Thu Mar 25, 2004 6:44 pm
Post
by ThangNhoc » Tue Apr 06, 2004 1:28 pm
i know wat u talking about, but don't know what port i should bypass though!